Extruded ceramic filter-honeycomb ceramic filter
Model Name:NX-ECF
Application: Grey iron, ductile iron, aluminum alloy and other non-ferrous alloys.
NX-ECF filter can effectively remove inclusions and eliminate turbulence in the metal stream. Mullite-based ceramic material with a dense network of perfectly cells to withstand thermal shock and extreme pouring temperatures.The cellular design also provides an engineered balance between flow rate and strength.Our extruded ceramic filters have excellent properties of good thermal stability, high specific surface area and resistance to acid and alkali. They are applicable to wide and extensive foundry filtration applications and processes.
Product features
-Decrease the impurity of molten metal
-Deduce the turbulence of molten metal
-Improve the castings mechanical properties
-Decrease machining cost and improve the cutting characteristics
-Improve casting quality and yield
Technique data
Main material: Cordierite, Mullite.
Refractoriness: >1500 Degree C
CSI (cells per square inch):100/200/300
Porosity(%): 35-55
Bulk Density(g/cm3): 1.0-1.3
Compression strength: above 20MPa
Size:From 40mm to 150mm square, rectangle and round shape
Hole type: square, round, triangle
Common sizes:37x37mm 43.5x43.5mm 49x49mm 55x55mm 66x66mm 81x81mm
Thickness:9.5mm 12.5mm 15mm
Advantages
-High dimensional accuracy
-High strength,no broken or damaged in use and transport
-Higher filtration effectiveness than fabric or wire mesh filter
